We understand how much of a hassle it can be to go through thousands of reviews when you have too many options. So, leave all your worries, check out this ultimate guide, and make a hassle-free purchase decision.
10 Best esr meter Reviews in 2021
- -- This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
- -- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test. Using true 100 KHz sine w-ave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
- -- This ESR meter is equipped with a SMD alligator clip for more accurately testing. Copper plating on the surface, which is anti-corrosion and oxidation resistance.
- -- This ESR capacitance tester is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C). The impedance become small, and we can then measure the true series resistor value.Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
- -- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
- This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
- This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
- Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
- The "Sorting"mode could help the user to make a quick sort for a bunch of components.
- Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.
- Measure Capacitance and ESR In-Circuit
- New enhanced dynamic range of 0.00 to 40.0 ohms
- ESR Resolution as fine as 0.01 ohms and Capaciatance of 0.2uF!
- Protected against highly charged capacitors.
- Audible alerts for various ESR levels.
- Precision LCR Meter, 0.1% Accuracy, ideal for SMD, calibrated, certificate included
- Automated component identification. Automatic and manual C, R, L, Z, ESR modes
- ClearValue OLED Display, Swiss 24K Gold-plated Test Leads, Built-in Li-Ion battery
- Amazon Special: Portable and clam shell cases, spare premium test leads included
- 2 Years Warranty and Lifetime support. Supplied directly from Advance Devices, Inc.
- [Multi-functional Transistor Tester]: It is very easy to test plug-in and SMD devices, it can also be used to test different kinds of triodes, thyristors, MOSFET, enable to analysis the device type, the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
- [Automatical Identification]: Bide smart technology make this transistor checker can automatically detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices.
- [2 POWER/TEST Button]: POWER/TEST button on both sides, you can operate it with your left or right hand.
- [Easy to Use]: Single key operation, there is a table "typical ESR value of electrolytic capacitor" at the back, provide a clear indication that you can quickly understand and use it.
- [Added Functions]: The transistor tester will be auto power off to save energy if there is no any operation within about 10 seconds. Large LCD display with backlight function for easy reading.
- Basic accuracy – R: 0.1%, L: 0.2%, C: 0.2% (see user manual for details)
- 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz with 3 test voltage - 0.2Vrms, 0.5Vrms, 1.0Vrms
- Wide measurement range – R: 20mΩ to 10MΩ, C: 0.1pF to 10mF, L: 10nH to 1H
- Additional diode and LED testing function
- One year warranty, lifetime support
- Tests ESR of >1uF electrolytics in circuit
- Non polarized test leads with resistance compensation
- Automatic power off when reading is unchanged for 3 minutes
- Easy-to-read high brightness 0.5 inch (13mm) piercing blue LED display
- Full 1yr warranty for manuacturing defects
- ✔ WIDE APPLICATION: This multifunctional capacitance meter can be used to test triode, field-effect tube(FET), diode, resistor, capacitor, inductor, MOS, SCR, which is available for various electric transistor testing.
- ✔ LARGE & CLEAR LCD DIGITAL DISPLAY: This amazing detector adopts 1.8" TFT color LCD screen with high-resolution. Besides, different parameter is shown with different color, convenient and simple for you to check the parameter.
- ✔ AUTOMATICAL IDENTIFICATION: DROK intelligent transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices automatically.
- ✔ BATTERY POWERED: This monitor is powered by DC9V battery (not included).
- ✔ AUTO SHUT-DOWN FUNCTION: Our advanced electronic transistor tester owns auto shut-down function. There is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s.
- Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer
- Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.
- High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)
- 128*64 big Backlight LCD display,only 2mA when stand by.
- Auto power off function to avoid unnecessary waste, saving battery power, improved battery life
- Automatic detection of NPN and PNP bipolar transistors, N- and PChannel MOSFETs, JFETs, diodes, double diodes, Thyristors and Triacs. ● Measuring of current amplification factor and Base-Emitter threshold voltage of bipolar transistors.
- Detection of the protection diode of bipolar transistors and MOSFETs. ● Measuring of the Gate threshold voltage and Gate capacity value of MOSFETs. ● The inductance measuring range is from 0.01mH to 20H, out of range or if the resistor higher than 2.1KΩ will be shown at resistor.
- Testing time is about two seconds, only capacity or inductance measurement can cause longer period. ● Small Devices Container is design for placing the small size components. ● The Probe socket support different kinds of probes.
- With a Typical ESR Value of Electrolytic Capacitor table on the cover, e- asy for user to judgment the detected capacitor's quality. The ESR table is for reference only, use the manufacturer's data as standard.
- Package list: ESR02 Pro multimeter, one pair of Agllicator clip test leads ,Manual
Factors You Should Consider Before Buying the esr meter
As you already know, research is essential before making any purchase. So, there are some factors you should consider before starting your research. This is important so that you can make your entire buying process as hassle-free as possible.
Remember, your time has as much value as your money. So, there are a few things you should determine which will affect your research as well.
There are a few questions you should ask yourself to determine your course of research on the esr meter:
- Is this esr meter serving the purpose of purchase? What are your expectations from the product?
- What functions must the esr meter have? Are there any specific functions that you are seeking in the product?
- Is there a specific budget, or is the budget flexible?
- Will the esr meter require maintenance and upkeep costs?
- Are you looking to buy the esr meter online or offline? What will be the best places to purchase the product?
- Where will you seek reliable information on the esr meter?
Having multiple options from various brands can get confusing, so ask yourself these questions to narrow down your research.
Once you determine your expectations from the esr meter and your price range, you decide which ones you must research. The research will help you determine the pros and cons. But before that, where will you get the reliable information to conduct your research?
Sources for Research
It’s 2021, and your best sources for information and research can be found online. Google esr meter and you will find the best selling online marketplaces available. Visit any or each of them to learn about the specifications and prices given on your esr meter.
You will be able to find the best deals out of all the options. You can also watch some YouTube videos on the product to see for yourself the functionality of the esr meter.
Advantages of Buying Products from Online Sites
Online sites provide a variety of benefits that make your selection and buying process easier. Here are some of the advantages of buying products from online sites:
Reliable online sites give you the benefit of comparing prices and finding the best deals. Platforms like Amazon.com work with manufacturers directly to provide better deals. And the coupons and occasional discounts add to it.
There are no intermediaries in between to make the buying process easy. And the best part? No trouble of going to the shop.
Renowned online sites like Newegg, Amazon, Walmart have branches all over the country. Their transaction and delivery policies are reliable compared to other e-commerce platforms.
More Variety – the best part about online shopping platforms. These sites give you access to a vast variety of options to choose from.
Suppose you go to Amazon.com. Search esr meter and up comes options of the product in different prices, brands, and specs. You get to browse these options from the comfort of your home and save time.
You can choose the one that fits your need from your preferred seller. Yes, online platforms even give you the option to choose your seller.
These online sites have numerous customer reviews of the products shown. So, you know which product is authentic and which seller is authorized. And for these facilities provided, they are trustworthy and credible.
Other additional benefits of shopping from online sites would be the facility of easy return and record of the purchase. Online sites are constantly making changes to make shopping easy and hassle-free from the comfort of our homes.
How to Select the esr meter
Making your final decision can pose to be a challenge. But worry not. We have a few suggestions to make your selection process easier.
Before that, we would recommend you opt for sites like Amazon, Walmart, Newegg, and Best Buy for your purchase.
So the factors you should consider while selecting your esr meter would be:
Hop on to any of these sites and search the options you have shortlisted. Then compare the prices and look for discounts. Don’t forget to factor in shipping charges as well.
Once you get the best favorable deal, you can opt for the esr meterto match your need.
Price and brand are somewhat interrelated. Usually, high-end brands charge more. But higher price does not mean a better choice.
So, opt for the brand that meets your need the best.
Factor in the functionality of the product as it is very crucial. Check if the specs meet your need. Consider buying the one that will last in the longer run.
Understand the esr meter specs and functionality to determine its use for you.
As we mentioned before, online sites usually have a review section. This section is filled with customer feedbacks and even pictures of the product.
Browsing through these reviews is the smartest thing to do. These reviews allow you to comprehend how the product will work for you. You can even determine the pros and cons of these reviews.
Check the rating on the website to learn if the seller is delivering the esr meter as expected by the other buyers.
All these factors will contribute to choosing your best esr meter that meets your expectations. So, use your time efficiently.
And that is all for the ultimate guide to buying the esr meter. We hope you can make your purchase confidently. Happy Shopping!